You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | Prime-Line Sliding Door Handle Set With Clamp - 1 Each This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. ... more | FREE shipping go to store |
 | These two ear wall brackets are constructed of 18 GA. continuous roll-formed stainless steel material and come with an inside width of 1 inch, designed for installations of 1 inch thick panels. They ship with a peel-away plastic liner to protect their... ... more | FREE shipping go to store |
| Best Seller  | This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside... ... more | go to store |
 | This is a Mono-rail roller for drawer slide systems. Roller mounts on the left-hand side of drawer as viewed from the rear; 13/16 in. outside diameter of the nylon roller. The 13/16 in. diameter roller features a 3-1/2 in. high bracket. Roller is 5/16... ... more | go to store |
 | These pilaster support brackets are constructed of stainless steel and come in a satin finish. This model features a 2-ear top bracket (U-shaped) that will hold a pilaster or partition panel of up to 1-1/4 inches thick. Partition supports of this size... ... more | FREE shipping go to store |
 | This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race and steel ball bearings. The outside diameter of these rollers... ... more | go to store |
 | Keep your shower door secure with this Prime-Line stainless-steel shower door catch. This is a stainless steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of the swinging shower door and hold the door... ... more | go to store |
 | D 1876 is a Unique Housing tandem roller assembly often found on Andersen patio doors as well as several other manufacturers of wood patio doors. It has two 1-1/2 inch concave steel ball bearing rollers set in a stamped steel housing with side... ... more | go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Door... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
 | These passage door latches are constructed of steel and come in a brass plated finish. This latch is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at maximum width and height of 9/32 inches. It is... ... more | go to store |
 | This is a 1-1/8 in. bright brass latch bolt filler plate. These are typically used to cover the mortise hole on door edge or jamb when a hole is no longer being used for a lock or strike. Each door filler plate is constructed from heavy gauge steel and... ... more | go to store |
 | Easily operate your screen door with the Prime-Line sliding screen door corner assembly. An all-in-one corner and roller combination, the corner fits into the frame to hold the bottom or top rails and the side stiles together. This assembly is used on... ... more | go to store |
 | This high security loop lock is constructed of solid steel and features a 2-1/4 in. reach. It engages into a diecast keeper bracket, and it is for use on left-handed sliding patio doors with narrow rails. The hardened steel locking rod secures the door... ... more | go to store |
 | This is an S-tab tandem roller assembly with two 1-1/2 in. concave nylon ball bearing rollers. When the corner screw passes through the S-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... ... more | go to store |
 | This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in a plated brass finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each... ... more | go to store |
 | This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... ... more | go to store |
 | This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... ... more | FREE shipping go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... ... more | go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
 | This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end.... ... more | go to store |
 | This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | These vintage style doorknobs are constructed of steel and come in optional finishes. These knobs are designed for indoor use only, and they include one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. This colonial... ... more | go to store |
 | These vintage style doorknobs are constructed of steel and come in optional finishes. These knobs are designed for indoor use only, and they include one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. This colonial... ... more | go to store |
 | These vintage style doorknobs are constructed of steel and come in optional finishes. These knobs are designed for indoor use only, and they include one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. This colonial... ... more | go to store |
 | This is an F-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a black plastic pull with a steel latch. These are non-handed to fit either a left or right sliding screen door and feature a mortise installation. They are designed to fit on Jim Walters sliding extruded frame screen doors. Mounting holes are... ... more | go to store |
 | This is a black plastic pull with a steel latch. These are non-handed to fit either a left or right sliding screen door and feature a mortise installation. They are designed to fit on Jim Walters sliding extruded frame screen doors. Mounting holes are... ... more | go to store |
 | This is a black plastic pull with a steel latch. These are non-handed to fit either a left or right sliding screen door and feature a mortise installation. They are designed to fit on Jim Walters sliding extruded frame screen doors. Mounting holes are... ... more | go to store |
 | These pivot hinge pins are constructed of steel and come in a zinc-plated finish. They feature a knurled (grooved) and female 10-24 threaded end on one side, and a spear with a snap-lock notched end on the other. This pivot hinge pin has a 1/4 inch... ... more | go to store |
Ads related to Prime Line U9005 161665 241947 Bed Frame Rail Clamps Steel 1 Inch 2 Pack Each
