Home Hardware › Hot › ekena millwork 2 1 8

5/8 x 2-1/2 x 2-1/2 x 3/16 Hot Dip Galvanized Grade 2 Steel Square Washers

Diameter: 5/8 Length: 2-1/2 Thickness: 3/16 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Nominal Size: 5/8 Style: Hole Square Type: Square Washer A square washer is used to decrease tension by increasing the surface area of the contact... more

3/8 x 2 1/2 Fender Washers / Steel / Hot Dip Galvanized / Outer Diameter: 2 1/2 / Thickness Range : .051 - .080 (Quantity: 20 Lbs about 196 pcs)

Fender Washers Used when an extra large bearing surface is required Steel Hot Dip Galvanized more

25-Pack 811665 Hot Dipped Galvanized Hex Bolt 5/8-Inch X 4-1/2-Inch 5/8 X 4-1/2

Require A Pre-Drilled Hole With Compatible Female Thread Hex Bolts Feature A Six-Sided Head Which Is Designed To Be Tightened Using A Wrench Or Drill Hot Dipped Galvanized From Brand Name: more

3/8 x 6-1/2 Hex Machine Bolt A307 Grade A Steel (Quantity: 25) Hot Dipped Galvanized Steel Coarse Thread Partially Threaded 3/8-16 x 6-1/2

Hex bolts are bolts with a hexagonal head on one end with no washer face on the bearing surface and a threaded shaft on the other end more

5/16 -18 x 5/8 x 2-1/4 x 3-1/2 Hot Dip Galvanized Eye Bolts (2 pcs.)

Diameter: 5/16 Length: 2-1/4 Material: Steel Finish: Hot Dip Galvanized Thread Size: 18 (Coarse) Type: Screw Eye Bolt Diameter 3: 1-1/4 Box of 2. more

5/8 x 1-15/32 x 3 x 3 x 1/8 Hot Dip Galvanized Grade 2 Steel Bearing Plates SQRWSR-144

Diameter: 11/16 Diameter 2: 1-15/32 Length: 3 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Nominal Size: 5/8 Style: Bearing Plate Type: Square Washer A square washer is used to decrease tension by increasing the surface... more

5/8 x 1-1/4 x 4-1/2 Hot Dip Galvanized Shoulder Eye Lag Screws (1 pcs.)

Diameter: 5/8 Diameter 2: 1-1/4 Length: 4-1/2 Material: Steel Finish: Hot Dip Galvanized Thread Length: Partial Style: Shoulder Type: Screw Eye Lag Diameter 3: 2-1/4 Box of 1. more

5/8 x 1-15/32 x 3 x 3 x 1/8 Hot Dip Galvanized Grade 2 Steel Bearing Plates SQRWSR-144

Diameter: 11/16 Diameter 2: 1-15/32 Length: 3 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Nominal Size: 5/8 Style: Bearing Plate Type: Square Washer A square washer is used to decrease tension by increasing the surface... more

3/8 -16 x 2-1/2 Hot Dip Galvanized Eyebolts w/Shield Nuts (1 pcs.)

Diameter: 3/8 Diameter 2: 3/4 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Thread Size: 16 (Coarse) Style: Shielded w/ nut Type: Screw Eye Bolt Diameter 3: 1-3/8 Box of 1. more

1/2-13 x 8 1/2 Carriage Bolts / Steel / Hot Dip Galvanized - 50 Piece Carton

Fastener SuperStore Offers Bulk Carriage Bolts - 1/2-13 x 8 1/2 Carriage Bolts / Steel / Hot Dip Galvanized in 50 Piece Cartons more

1/2 -13 x 8-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1-8 x 2 1/2 Structural Bolts / A325 / Hot Dip Galvanized - 45 Piece Carton

Fastener SuperStore Offers Bulk Structural Bolts - 1-8 x 2 1/2 / A325 / Hot Dip Galvanized in 45 Pc. Cartons more

1/2 -13 x 1 Hot Dip Galvanized Grade 2 / A307 Carriage Bolts (8 pcs.)

Diameter: 1/2 Length: 1 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 13 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 9/32 Box of 8. A carriage bolt has a domed or countersunk... more

1 Pc Baron 3/8 In. X 2-1/2 In. L Hot Dipped Galvanized Steel Lag Thread Eyebolt Nut Included

Brand Name: Baron *Eye - Inside Diameter: 3/4 *Eye - Outside Diameter: 1-1/2 *Finish: Hot Dipped Galvanized *Length Under Eye: *Material: Steel *Nut Included: Yes *Overall Length: 2-1/2 *Packaging Type: Bulk *Product Type: Lag Thread Eyebolt *Rod/Wire... more

1/2 x 9/16 x 1-3/8 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-181

Diameter: 9/16 Diameter 2: 1-3/8 Thickness: 7/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 1/2 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

1 pc Zoro Select Lag Screw 3/8 in 2-1/2 in Steel Hot Dipped Galvanized Hex External Hex Drive 50 PK

Hex Head Lag Screw Material Steel Finish Hot Dipped Galvanized Screw Size 3/8 In. Fastener Length 2 1/2 in Threads per Inch 7 Thread Style Partially Threaded Minimum Thread Length 2 9/64 in Dimensional Standards ASME B18.2.1 Pack Size Small System of... more

1/2 x 9/16 x 1-3/8 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-181

Diameter: 9/16 Diameter 2: 1-3/8 Thickness: 7/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 1/2 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

5/8 -11 x 2 1/2 (PT) Coarse Thread Grade A325 Type 1 Heavy Hex Structural Bolt Medium Carbon Steel Hot Dip Galvanized Pk 700

PRODUCT SPECIFICATIONS Part #: 0000-125309 Fastener Type: Heavy Hex Structural Bolt Size Description: 5/8 -11 x 2 1/2 (PT) Diameter/Nominal Size: 5/8 Length: 2 1/2 Thread Pitch: 11 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage:... more

1/2 -13 x 8 1/2 6 THD UNDER-SIZED Coarse Thread A307 Grade A Carriage Bolt Low Carbon Steel Hot Dip Galvanized Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-126944 Fastener Type: Carriage Bolt Size Description: 1/2 -13 x 8 1/2 6 THD UNDER-SIZED Diameter/Nominal Size: 1/2 Length: 8 1/2 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: 6... more

1/2 x 9/16 x 1-3/8 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-181

Diameter: 9/16 Diameter 2: 1-3/8 Thickness: 7/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 1/2 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

1 Pc Baron 3/8 In. X 2-1/2 In. L Hot Dipped Galvanized Steel Eyebolt Nut Included

Brand Name: Baron *Eye - Inside Diameter: 3/4 *Eye - Outside Diameter: 1-1/2 *Finish: Hot Dipped Galvanized *Length Under Eye: *Material: Steel *Nut Included: Yes *Overall Length: 2-1/2 *Packaging Type: Bulk *Product Type: Eyebolt *Rod/Wire Diameter:... more

1/2 x 3 x 3 x 1/8 Hot Dip Galvanized Grade 2 Bearing Plates (25 pcs.)

Diameter: 9/16 Length: 3 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Nominal Size: 1/2 Style: Bearing Plate Type: Square Washer Box of 25. A square washer is used to decrease tension by increasing the surface area of the... more

3/8 -16 x 1-1/2 Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts CBS-457

Diameter: 3/8 Length: 1-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 16 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 7/32 A carriage bolt has a domed or countersunk head and... more

3/8 -16 x 1-1/2 Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts CBS-457

Diameter: 3/8 Length: 1-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 16 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 7/32 A carriage bolt has a domed or countersunk head and... more

3/8 -16 x 3/4 x 2-1/2 x 4 Hot Dip Galvanized Eye Bolts (1 pcs.)

Diameter: 3/8 Diameter 2: 3/4 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Thread Size: 16 (Coarse) Type: Screw Eye Bolt Diameter 3: 1-1/2 Box of 1. more

Hillman 812584 3/8X3-1/2 Carriage Bolt 3/8 x 3-1/2-Inch Hot-Dipped Galvanized 50

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

Grip-Rite #10-1/4 x 2-1/2 In. 8-Penny Hot-Galvanized Steel Common Nails 1Lb.

Grip-Rite fasteners are the choice of contractors who want professional results from a brand they know and trust. Grip-Rite exterior galvanized common nails are used for outdoor applications of the following -- construction carpentry and framing. The... more

2 PC Bail 3/8 X 1/2 Tap Thread Eye Nut Hot Dipped Galvanized Drop Forged Carbon Steel 2 250 Lbs WLL

3/8 Bail Size Thread Size:1/2 - 13 Drop Forged Carbon Steel; Hot Dipped Galvanized Finishing WLL (Working Load Limit):2 250 Lbs (DO NOT Exceed The WLL) Quantity:2 pcs/ set; Unit Weight:5 oz each unit more

3/8 x 2 1/2 Hex Flange Lag Screws | Indented | Grade 2 | Low Carbon Steel | Hot Dip Galvanized (Quantity: 275)

3/8 x 2 1/2 Hex Flange Lag Screws | Indented | Grade 2 | Low Carbon Steel | Hot Dip Galvanized (Quantity: 275) more

3/8 -16 x 2-1/2 Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts CBS-475

Diameter: 3/8 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 16 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 7/32 A carriage bolt has a domed or countersunk head and... more

3/8 x 3/4 x 2-1/2 Hot Dip Galvanized Steel Shoulder Eye Lag Screws (2 pcs.)

Diameter: 3/8 Diameter 2: 3/4 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Thread Length: Partial Style: Shoulder Type: Screw Eye Lag Diameter 3: 1-3/8 Box of 2. more

3/8 -16 x 2-1/2 Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts CBS-475

Diameter: 3/8 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 16 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 7/32 A carriage bolt has a domed or countersunk head and... more

1/2 -13 x 1 x 6 x 8 Hot Dip Galvanized Eye Bolts (1 pcs.)

Diameter: 1/2 Diameter 2: 1 Length: 6 Material: Steel Finish: Hot Dip Galvanized Thread Size: 13 (Coarse) Type: Screw Eye Bolt Diameter 3: 2 Box of 1. more

1 1/8 -7xW1 1/2 xL3 Hex Coupling Nut A563 Grade A Hot Dip Galvanized (inch) (Quantity: 50)

1 1/8 -7xW1 1/2 xL3 Hex Coupling Nut A563 Grade A Hot Dip Galvanized (inch) (Quantity: 50) more

National Hardware N341-420 Weldable Flat Bar 1/8 Inch Thick By 1-1/2 Inch By 36 Inch Hot Rolled Plain Steel

Key Features Excellent forming and welding characteristics Hot-rolled plain steel Weldable Flat Bar 1/8 Inch Thick 1-1/2 Inch By 36 Inch Hot Rolled Plain Steel. Designed as supports for construction or industrial applications. Used for ladder hangers... more

3/4 -10 x 1-1/2 x 8 x 10-3/4 Hot Dip Galvanized Eye Bolts (1 pcs.)

Diameter: 3/4 Diameter 2: 1-1/2 Length: 8 Material: Steel Finish: Hot Dip Galvanized Thread Size: 10 (Coarse) Type: Screw Eye Bolt Diameter 3: 3 Box of 1. more

Value Collection 1-1/8 - 7 Thread 6-1/2 Length Under Head Steel Hex Head Bolt Hot Dipped Galvanized Coated UNC Thread ASTM A325

Value Collection 1-1/8 - 7 Thread 6-1/2 Length Under Head Steel Hex Head Bolt Hot Dipped Galvanized Coated UNC Thread ASTM A325 more

5/16 -18 x 5/8 x 3-1/4 x 4-1/2 Hot Dip Galvanized Eye Bolts (1 pcs.)

Diameter: 5/16 Length: 3-1/4 Material: Steel Finish: Hot Dip Galvanized Thread Size: 18 (Coarse) Type: Screw Eye Bolt Diameter 3: 1-1/4 Box of 1. more