› Irwin drill bit non slip 3

1 PC Irwin 73312 TurboMax HSS Straight Shank Jobber Length Drill Bit 3/16

Irwin Turbomax High Speed Steel Straight Shank Jobber Length Drill Bit Features Self-Centering Turbomax Tip For Clean Entry And Fast Starts; Stays Sharp Longer. High Performance Metal Drilling For Portable Drill Users Works Well On Curved Surfaces.... more

1 PC Irwin Tools 3046009 Speedbor Max Self Feed Wood Drill Bit 1-3/4

Ideal For Pipe & Conduit Systems. 3 Times The Cutting Area & Edges Of Standard Self Feed Bits. For Drilling Large Diameter Holes In Wood Aggressive Screw Pitch. Precision Milled Shank Eliminates Run Out & Wobble. Forged In 1 Piece From High Carbon... more

IRWIN 3046009 Wood Drilling Bit,Steel,Bit Dia. 1-3/4"

Set, Wood Drilling Bit, Self-Feed, Drill Bit Material Carbon Steel, Drill Bit Size 1 3/4 in, Shank Size 7/16 in, Overall Length 5 in, For Use With Wood, Number of Pieces 1 more

Irwin 39112 Installer Drill Bit 3/4

IRWIN INSTALLER DRILL BITIrwin Power Drill Installer Bit measures 18 inches long and 3/4-inch diameter for installing all types of small wire in homes offices garages etc. A small hole in the f more

IRWIN 71831 - 31/64 General Purpose HSS 3/8 Reduced Shank Fractional Drill Bit

IRWIN 71831 - 31/64 General Purpose HSS 3/8 Reduced Shank Fractional Drill Bit more

Irwin 49613 3/16In Brad Point Drill Bit

IRWIN Tools Brad Point Drill Bit 3/16-Inch 49613 Brad Point Drill Bits Brad point tip provides accurate positioning for starting the hole Bit is precision ground for use in furniture making doweling cabinetry and other woodworking applications where an... more

Irwin 3/8 in. Dia. x 6 in. L High Speed Steel Hammer Drill Bit 1 pc. - Case Of: 1; Each Pack Qty: 1

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 3/8 in. X 6 in. L High Speed Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Irwin Speedhammer Plus 3/8 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

Irwin Speedhammer Plus 3/4 in. Dia. x 8 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin Tools 49616 Brad Point Drill Bit 3/8

IRWIN Tools Brad Point Drill Bit 3/8-Inch 49616 Brad Point Drill Bits Brad point tip provides accurate positioning for starting the hole Bit is precision ground for use in furniture making doweling cabinetry and other woodworking applications where an... more

Irwin 49616 Brad Point Drill Bit 3/8

Precision-ground for use in furniture making doweling cabinetry and other woodworking applications where an exact hole size is required. more

Irwin 3041020 Speedbor Max Wood Boring Drill Bit 1-3/8 x 6

1-3/8 x 6 ; Tri-flute design for faster chip removal; 3 cutting spurs for clean holes with minimal breakout ; Six times faster than standard spade bits; Screw tip fully heat treated; Hex shank for quick change applications; more

1 PC Irwin 3041020 Speedbor Max Speed Standard Length Drill Bit 1-3/8 x 6

Irwin Speedbor Max Speed 6 Standard Length Drill Bit Features Tapered Tri-Flute Design For Faster Chip Ejection And Less Binding. Cutting Spurs Have 3 Cutting Edges For Faster Cleaner Holes Less Breakout And Extended Drilling Life. Full Screw-Point Tip... more

Irwin Speedbor 1 3/8 in. Dia. x 6 in. L Carbon Steel Wood Boring Bit 3/8 in. Quick-Change Hex Shank

Speedbor maximum Drill Bit 1-3/8 x 6 inch 1-3/8 inch x 6 inch Speedbor maximum Drill Bit standard length Tri Flute design for faster chip ejection cutting spurs have 3 cutting edges for added durability full screw tip allows bit to self feed grooved... more

IRWIN 3041020 Wood Boring Bit,1-3/8 in. dia.,3/8 Shank

Speedbor, Hybrid Drill Bit, 1 3/8 in, 2 7/8 in Flute Length, 6 in Overall Length, Shank Diameter 3/8 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Irwin Speedhammer Plus 3/4 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin 49912 Power Drill Auger Bit 3/4

Irwin 49912 Power Drill Auger Bit 3/4 more

Irwin 3/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 1 pc.

IRWIN Auger Bit is for fast rough or clean and exact holes. Irwin s extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their drilling needs. more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

IRWIN Drill Bit Set for Wood 3-Piece (3041003)

Key Features;Tri-flute design for faster chip ejection;Cutting spurs have three cutting edges for added durability;The fastest speedbor ever;Full screw tip allows bit to self-feed;Grooved hex shank prevents slipping in drill chuck or bit extension;Fits... more

Irwin Speedbor Multi Size in. Dia. Carbon Steel Wood Boring Bit Quick-Change Hex Shank 3 Pc

Upgrade your tools with the Irwin Speedbor Multisize Carbon Steel Wood Boring Bits (Quick-Change Hex Shank). This set features three bits with a state-of-the-art Tri-Flute design. The Irwin Speedbor drill bits are designed to produce fast chip ejection... more

IRWIN 3041003 Woodboring 3pc Bit Set

Hybrid Drill Bit Set, Number of Drill Bits 3, Straight, Material - Machining Carbon Steel, Finish - Machining Bright (Uncoated), Measurement System Fractional Inch, Drill Bit Sizes Included 5/8 in, 3/4 in, 1 in, Decimal Equivalent 0.625, 0.75, 1, Flute... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

29PC DRILL BIT SET BLACK & GOLD OXIDE

Features and Benefits: Oxide treatment resists corrosion helps prevent bit from rusting Turbomax tip starts up to 10 times faster Flatted shanks above 11/64 eliminates slippage in drill chuck Reduced shank above 3/8 allows use of larger drill bits in a... more

Irwin 1866036 Wood Speedbor Max Drill Bit 7/8 x 4

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed as well as three 3 cutting spurs for faster cleaner holes less breakout and extended drilling life. The... more

29PC DRILL BIT INDUSTRIAL SET CASE TIN COATED

Features and Benefits: Titanium Nitride coating extends cutting edge life up to 6 times 135 degree split point starts on contact cuts with less force Reduced shank above 3/8 allows the use of larger drill bits in a 3/8 chuck Rubber overmolded case... more

Irwin 1866037 Wood Speedbor Max Drill Bit 1 x 4

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed as well as three 3 cutting spurs for faster cleaner holes less breakout and extended drilling life. The... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 49600 Drill Bit Set Steel

Brad Point Drill Bit Sets 3/16 in - 1/2 in Cut Dia. Irwin Brad Point Drill Bit Sets WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause... more

Irwin Tools 3041016 11/16 X 6 Speedbor Max Drill Bit

-The Fastest Speedbor spade bit ever-Tri-Flute design for faster chip ejection-Cutting spurs have 3 cutting edges for added durability-Full screw tip allows bit to self feed-Grooved hex shank prevents slipping in drill chuck or bit extension more

Irwin 49614 Brad Point Drill Bit 1/4

IRWIN INDUSTRIAL BRAD POINT DRILL BIT 1/4 Brad point. 1/4 x 3-31/32 . Precision-ground for use in furniture making doweling cabinetry and other woodworking app more

Hanson 21/64 TURBOMAX DRILL BIT CARDED

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more