› Hillman › Steel 13 x 20 x 4

Hillman Pan Head Phillips Machine Screw 1/4-20 x 3/4 Zinc Steel 7 Sets

Hillman Coarse Machine Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools... more

Hillman No. 1/4-20 in. x 1-1/4 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Phillips/Slotted combination. Round head. Box/100. 1/4 -20 x1-1/4 . Manufacturer number: 90398. SKU #: 56331. Distributed by Hillman Group Rsc. more

Hillman Hex Bolts and Nuts Grade 2 Steel Zinc 1/4-20 x 1.5 4 Sets

Hillman zinc plated steel Hex bolts are machine bolts that have been designed to join materials to prevent shear movement. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. The Hex Bolts feature a... more

100 Pack 1/4-20 x 1-1/4 Carriage Bolt Steel Round Head Each

100 Pack; 1/4-20 x 1-1/4 Carriage Bolt; Steel Round Head; Square Neck; Coarse Thread. more

Hillman 883149 Steel Hex Tap Bolt 1/4 in. -20 x 4 in. 1-Pack

Features Also known as fully-threaded hex cap screws the Hillman Hex Tap Bolt is useful in myriad construction agriculture and automotive applications. Hillman Hex Tap Bolts feature a hex head type and smooth shoulder. 1/4 in.-20 USS coarse screw... more

Hillman No. 1/4-20 in. X 1-1/4 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 5 pk

Round-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

HILLMAN No. 1/4-20 in. X 3/4 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 6 pk

Fasten metal parts together using the Hillman 1/4 -20 Machine Screw with Nut. It has a slotted round head. This Hillman 1/4 -20 Machine Screw with Nut is made from steel and is plated with zinc for durability. more

Hillman No. 1/4-20 in. x 3/4 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Machine screws are used with nuts or screwed directly into a threaded socket to hold metal parts together. Measure from the bottom of the head to the tip of the screw to get Fastener Length. If nuts are needed use nuts with the same finish and tap for... more

Hillman 220253 Heat Treated Steel Hex Cap Screw 1/2-13 x 4 25 Pack Each

Heat treated steel coarse thread. Hex cap screw. 25 Pack 1/2-13 x 4 Heat treated steel Coarse thread Hex cap screw Grade 8. more

Hillman Hex Cap Screw 1/2 - 13 X 4 Zinc Dichromate Grade 8 Steel Hex Head

The Hillman Group 220253 Grade 8 Hex Cap Screw 1/2-Inch x 4-Inch 25-Pack more

Hillman Fasteners 200258 0.5-13 x 4 in. Heat Treated Steel Hex Cap Screw

Heat treated steel hex cap screw. Coarse thread grade 5. 25 pack. Size - 0.5-13 x 4 in. Dimension - 0.6 x 0.6 x 6.49 in. Item weight - 6.49 lbs.Specifications Heat treated steel hex cap screw Coarse thread grade 5. 25 pack Size - 0.5-13 x 4 in.... more

Hillman Fasteners 190330 0.5-13 x 4 in. Low Carbon Steel Hex Bolt 25 Pack

Features Size - 1/2-13 x 4 in. Low Carbon Steel Hex Bolt. Coarse Thread. 25 Pack. Dimension - 0.8 x 0.8 x 6.49 in. Item Weight - 6.49 lbs. - SKU: TRVAL19551 more

Hillman Hardware Essentials 320838 Steel Zinc Flagged U-Bolt 1/4 X 4 X 3/4

FEATURES: Hillman Hardware Essentials U-bolts are great for piping projects. U-bolts are available in stainless steel and zinc finishes. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as... more

Hillman Hardware Essentials 320840 U-Bolt Saddle Steel Zinc 1/4 x 2-3/4 x 3/4

FEATURES: Hillman Hardware Essentials U-Bolt Round Saddle Zinc (1/4 x 2-3/4 x 3/4 ) are great for piping projects. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as follows diameter x... more

Hillman Pan Head Phillips Machine Screw 1/4 -20 x 1/2 Zinc Steel 9 Sets

Hillman Coarse Machine Steel Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines... more

Hillman Hex Cap Screw 1/4 - 20 X 1 Zinc Dichromate Grade 8 Steel Hex Head

Hillman 1/4 in. Dia. x 1 in. L Heat Treated Steel Hex Head Cap Screw 100 pk more

Hillman Hex Cap Screw 1/4 - 20 X 1 Zinc Dichromate Grade 8 Steel Hex Head

HX CP G8 NC Y 1/4X1 Hex cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. These screws are bolts with a washer face under the head. Use these grade 8 partially threaded screws anywhere a hex bolt may... more

Hillman Pan Head Phillips Machine Screw 1/4-20 x 1-1/2 Zinc Steel 6 Sets

Hillman Coarse Machine Steel Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines... more

Hillman 881166 1/4 in.-20 x 1 in. Steel Coarse Thread Hex Body Bolt Black

FEATURES: The Hillman Hex Body Bolt is a fastener consisting of a threaded pin or rod with a head at one end. They are designed to be inserted through holes in assembled parts and secured by a mated nut that is tightened by applying torque. Hillman... more

Hillman Carriage Bolt Steel 1/4-20 x 1.5-In. 100-Pk.

The Hillman Group 240015 Carriage Bolt 1/4-Inch X 1-1/4-Inch 100-Pack more

The Hillman Group Pan Head Phillips Machine Screw 1/4 -20 x 1 Zinc Steel 7 Sets

Hillman Coarse Machine Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools... more

Hillman 883148 Steel Hex Cap Screws 1/4 in.-20 x 3 in. - Count of 2

Features 1/4 in.-20 USS coarse screw thread; measure 3 in. L This hex tap bolt is part of the Hillman Deep Drawer program more

Hillman 3/8 in. D X 4 in. L Steel Hex Head Sleeve Anchors 20 pk

The Power-Bolt anchor is a heavy duty sleeve style self-locking anchor which is vibration resistant and removable. The design allows them to anchor into concrete brick block or stone. Turning the nut pulls the working end of the sleeve anchor up... more

HILLMAN No. 1/4-20 in. X 1/2 in. L Combination Truss Head Zinc-Plated Steel Machine Screws 100 pk

Zinc truss-head combination-drive machine screws have a low rounded top surface with a flat bearing surface greater in area than a round head fastener of the same nominal size. Weaker than a pan or round fastener but preferred in applications where... more

HILLMAN No. 1/4-20 in. X 1/2 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 8 pk

Round-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman 880312 Steel Alloy Socket-Head Cap Screw 1/4 in.-20 x 1 in. 2-Pack

FEATURES: The Hillman Socket-head Cap Screw carries a recessed internal socket drive to add strength. The socket head cap screw is commonly used on machine parts manufacturing equipment and other mechanical applications. The socket head screw will get... more

Hillman No. 1/4-20 in. X 1 in. L Slotted Flat Head Zinc-Plated Steel Machine Screws 6 pk

Product Details Stove bolts are used to fasten metal parts together that are going into a tapped hole and being held together by a nut. To obtain the fastener length measure from the underside of the head to the tip of the screw. Stove bolts are nearly... more

Borefast 1/4 in. D X 2-1/2 in. L Steel Pan/Wafer Head Screw and Anchor 20 pk

The Borefast Anchor and Screw in One is the best one-piece anchor for fastening into drywall and masonry materials. Brand Name: HILLMAN Diameter: 1/4 in. Length: 2-1/2 in. Material: Steel Head Style: Pan/Wafer Head Product Type: Screw and Anchor Number... more

240015 Carriage Bolt Zinc-Plated Steel 1/4-20 x 1.25 In. 100-Pk. - Quantity 1

Carriage bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self-locking to... more

Hillman Hex Bolts and Nuts Grade 2 Steel Zinc 1/4-20 x 1 5 Sets

Hillman zinc plated steel Hex bolts are machine bolts that have been designed to join materials to prevent shear movement. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. The Hex Bolts feature a... more

Hillman Pan Head Phillips Machine Screw 1/4-20 x 2-1/2 Zinc Steel 6 Sets New

Hillman Coarse Machine Steel Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines... more

Hillman No. 1/4-20 in. x 1-1/2 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Hillman Machine Screws 1/4 - 20 more

Borefast 1/4 in. D X 2-1/2 in. L Steel Pan/Wafer Head Screw and Anchor 20 pk

DuoPower Anchors are a two piece plug design that optimizes strength in all base materials and in all applications. Brand Name: HILLMAN Diameter: 1/4 in. Length: 2-1/2 in. Material: Steel Head Style: Pan/Wafer Head Product Type: Screw and Anchor Number... more

Hillman No. 1/4-20 in. x 2 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Hillman Machine Screws 1/4 - 20 X 2 Zinc/Phillips/Slotted Combination Round Head Box of 100 more

Hillman Wood Screws #8 x 3/4 Flat Phillips Zinc Plated Steel Pack of 20

The Hillman zinc plated steel wood screws are designed to tackle wood applications; these wood screws are used to join two pieces of wood. The smooth shank design allows the screw to pull two pieces of wood together for a reliable join/connection while... more

Hillman No. 1/4-20 x 3/4in. L Flat Head Zinc-Plated Steel Machine Screw (Pack of 10)

Flat-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman Group 290012 1/4-Inch x 1 100-Pack Zinc Fender Washers 1/4 x 1 Steel 100 Pieces

A fender washer is a flat washer with a thinner body and an increased outer diameter. They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for auto body repair fender washers are... more

Hillman Hardware Essentials 320830 U-Bolt Saddle Steel Zinc 1/4 x 1-1/2 x 3/4

FEATURES: Hillman Hardware Essentials U-Bolt Round Saddle Zinc (1/4 x 1-1/2 x 3/4 ) are great for piping projects. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as follows diameter x... more