50 in. Parallel Clamp - Pack of 2

DE-STA-CO 227-U Toggle Clamp,Horiz,2.40 In,7.50 In

Toggle Clamp, Base Mounting Style Flange, Handle Orientation Horizontal, Holding Capacity - Maximum 500 lbf, Arm Style U-Bar, Tip Material Neoprene, Clamp Arm Opening Angle 91 Degrees , Arm Length 2.65 in, Height Under Arm 1.25 in, Includes Locking... ... more

Vaughan 2 Piece Cable Clamps for Cord Management - 050052

Get your power cords, extension cords, cables and hoses organized and keep them that way with these adjustable and reusable cable and cord clamps. These nifty cable clamps are so much easier to use than zip ties, tape or rope. ... more

De-Sta-Co Straight Line Clamp,1/2",Steel 5150 - 1 Each

Straight Line Clamp, Base Mounting Style Flange, Handle Orientation Horizontal, Includes Locking Handle No, Holding Capacity - Maximum 5,800 lbf, Plunger Travel 1.91 in, Plunger Height 1.38 in, Plunger Thread 1/2-13, Includes Spindle No, Application… ... more

5-pack Erlenmeyer Flasks, 50-1000mL - Clear - 10x9.75x9 in

Specifications: Color: Clear Size: 50-1000mL Dimension: 10 x 9.75 x 9 inches Material: Glass Equip Your Laboratory A Gallup poll conducted among teens in 2003 found that Science was the most enjoyed subject in US Education. ... more

ProMediaGear Photographers Keychain Multi-Tool (2-Pack) A13B

[Pre Order - allow extra time] ProMediaGear Photographers Keychain Multi-Tool (2-Pack) Two Essential Photographer's Tools, 5/32" (4mm) Allen Wrench, Flat-Head Screwdriver, Convenient 2-Pack, 1" Split Ring for Keys, 540 Stainless Steel ... more

Stalwart 86PC Tool Set w/ Screwdrivers, Pliers, Wrenches, Clamps & Roll-Up Bag (Pink) | 5.5 H x 7 W x 11 D in | Wayfair 75-HT2086

The Tool Boxes by Stalwart have everything you need for basic repairs or little emergencies around the house. This 86-piece tools set comes with 2 flathead and 2 Phillips head screwdrivers, a hammer, measuring tape, needle nose pliers, an adjustable... ... more

Midwest Tool Offset Forged Aviation Snip 2 Pcs. Offset Aviation Set - Single Item

The Offset Forged Aviation Snips are best used for cutting full sheets of material because they allow the material to flow out of the way. The two-pack will allow tight right and tight left cuts as well as straight cuts in the full sheets of material.... ... more

Strong Hand Tools Rhino Cart w/Accessories

The BuildPro TMK820 kit consists of 78 pieces for quickly fabricating clamps and fixtures on your Build Pro table, rhino cart, or manipulator with a 5/8" hole pattern. Includes (4) Inserta Clamps (UDN5150) (4) Inserta Clamps (UEN5200) (2) Side Clamps... ... more

Strong Hand Tools Rhino Cart w/Accessories

The 66 piece fixturing kit is designed for Rhino Carts with 5/8" holes. Rhino Cart not included. Includes• (10) T55055 Lock Bolts• (2) T54201 Locating Pins• (2) PTT522K 2.3" Inserta Plier Clamps• (2) PTT634K 4" Inserta Plier Clamps• (2) UDN5150 6.5"... ... more

ZORO SELECT COL0609Z1 Clamp,OD 3/8 In,1/2 In W,Cushion,PK50

Clamp, Cushioned Cable Clamp, Rubber Cushion, Steel, Cable Clamping Dia. 3/8 in, Mounting Hole Dia. 0.2813 in, Clamp Thickness 0.032 in, Clamp Band Width 1/2 in, Black, EPDM Cushion Type, Hot Dipped Galvanized Clamp Finish, Temp. Range (F) -50 to +350,... ... more

ZORO SELECT COL3213Z1 Clamp,OD 2 In,3/4 In W,Cushion,PK10

Clamp, Cushioned Cable Clamp, Rubber Cushion, Steel, Cable Clamping Dia. 2 in, Mounting Hole Dia. 0.4063 in, Clamp Thickness 0.048 in, Clamp Band Width 3/4 in, Black, EPDM Cushion Type, Hot Dipped Galvanized Clamp Finish, Temp. Range (F) -50 to +350, -... ... more

ZORO SELECT COL1609Z1 Clamp,OD 1 In,1/2 In W,Cushion,PK25

Clamp, Cushioned Cable Clamp, Rubber Cushion, Steel, Cable Clamping Dia. 1 in, Mounting Hole Dia. 0.2813 in, Clamp Thickness 0.032 in, Clamp Band Width 1/2 in, Black, EPDM Cushion Type, Hot Dipped Galvanized Clamp Finish, Temp. Range (F) -50 to +350, -... ... more

ZORO SELECT COL2009Z1 Clamp,OD 1 1/4 In,1/2 In W,Cushion,PK25

Clamp, Cushioned Cable Clamp, Rubber Cushion, Steel, Cable Clamping Dia. 1 1/4 in, Mounting Hole Dia. 0.2813 in, Clamp Thickness 0.048 in, Clamp Band Width 1/2 in, Black, EPDM Cushion Type, Hot Dipped Galvanized Clamp Finish, Temp. Range (F) -50 to... ... more

KESON MC-18-50 50 ft Tape Measure, 1/2 in Blade

If you need a long tape measure, the KESON MC-18-50 is just what you are looking for. The 50 ft blade ensures that you have enough length to work with. With 1/8" graduations and an SAE measurement type, this long tape measure offers accurate... ... more

BESSEY 2400S-24 24 in Bar Clamp, Plastic, Steel Handle and 5 1/2 in Throat Depth

The BESSEY 2400S-24 24 in Bar Clamp is the perfect tool for welding and fabrication. With a steel and plastic handle, this bar clamp offers a firm grip. The swivel morpad has a larger surface area, providing better stability when it comes to applying... ... more

DOLPHIN COMPONENTS DC-1/2NB Cable Clamp,1/2 In,Black,PK100

Cable Clamp, Cable Clamp, 6/6 Nylon, Cable Clamping Dia. 1/2 in, Mounting Hole Dia. 0.2031 in, Clamp Thickness 0.063 in, Clamp Band Width 1/2 in, Black, Natural Clamp Finish, Temp. Range (F) 40 to 85, Package Quantity 100 ... more

BESSEY PS55 2 1/8 in Seaming Clamp, Wood Handle and

Made of stainless steel, the Bessey PS-55 Seaming Clamp is an ideal tool for all kinds of seaming applications. It has a wooden handle and rubber vacuum cups on its pads to help you get a firm grip. This 9 7/16 in. to 11 5/8 in. bar clamp is made of... ... more

WILTON 50 C-Clamp,1",Steel,Light Duty,500 lb.

C-Clamp, Jaw Pad Type Flat, Includes Swivel Pad Yes, Jaw Opening - Maximum 1 in, Jaw Opening - Minimum 0 in, Throat Depth 1 in, Clamping Force 500 lb, Body Material Forged Steel, Body Color Gray, Spindle Finish Zinc Plated, Spindle Material Steel,... ... more

KMC COL0509AL 5/16 In Dia. Aluminum, Rubber Cushion Clamp, 0.281 Hole

Clamp, Cushioned Cable Clamp, Loop Strap with Cushion, Aluminum, Cable Clamping Dia. 5/16 in, Mounting Hole Dia. 0.2813 in, Clamp Thickness 0.032 in, Clamp Band Width 1/2 in, Black, Rubber EPDM Cushion Type, Natural Clamp Finish, Temp. Range (F) -65 F... ... more

JONARD TOOLS HS-50 2 1/2 in Cable Stripper 1/2 in

The Jonard Tools HS-50 Cable Stripper is the perfect tool for stripping coaxial cables. It has a 1/2 in. capacity and will work with hardline jackets. The cable stripper can strip or core cables up to 1/2 in. wide. Made of durable, high-quality... ... more

BESSEY TGJ2.512+2K 12 in Bar Clamp, Composite Plastic Handle and 2 1/2 in

Bar Clamp, Clamping Capacity 12 in, Clamping Force 600 lb, Throat Depth 2 1/2 in, Jaw Pad Type Standard, Bar Thickness 1/4 in, Application Woodworking, Bar Material Steel, Bar Width 1 in, Handle Length 4 1/4 in, Handle Material Composite Plastic,... ... more

ZORO SELECT 5848 Hose Clamp,1-1/2 to 3-1/2 In,SAE 48,PK10

Worm Gear Hose Clamp, Band Material Stainless Steel, Band Material Grade 201, Band Thickness 0.022 in, Band Type Perforated, Band Width 9/16 in, Clamp Maximum Inside Diameter 3 1/2 in, Clamp Minimum Inside Diameter 1 1/2 in, Fastener Housing Material... ... more

WILTON 245 C-Clamp,2-1/2",Iron,Light Duty,1600 lb.

C-Clamp, Jaw Pad Type Flat, Includes Swivel Pad Yes, Jaw Opening - Maximum 2 1/2 in, Jaw Opening - Minimum 0 in, Throat Depth 4 3/4 in, Clamping Force 1,600 lb, Body Material Cast Iron, Body Color Gray, Spindle Finish Black Oxide, Spindle Material... ... more

WILTON 142-1/2C C-Clamp,2-1/2",Iron,Heavy Duty,1005 lb.

C-Clamp, Jaw Pad Type Flat, Includes Swivel Pad Yes, Jaw Opening - Maximum 2 1/2 in, Jaw Opening - Minimum 0 in, Throat Depth 2 1/2 in, Clamping Force 1,005 lb, Body Material Cast Iron, Body Color Black, Spindle Finish Black Oxide, Spindle Material... ... more

ZORO SELECT COL2413Z1 Clamp,OD 1 1/2 In,3/4 In W,Cushion,PK25

Clamp, Cushioned Cable Clamp, Rubber Cushion, Steel, Cable Clamping Dia. 1 1/2 in, Mounting Hole Dia. 0.4063 in, Clamp Thickness 0.048 in, Clamp Band Width 3/4 in, Black, EPDM Cushion Type, Hot Dipped Galvanized Clamp Finish, Temp. Range (F) -50 to... ... more

APEX TOOL GROUP MF-50 1/2 in Drive, 1/2" Female x 1/2" Male SAE Socket

Flex Socket Extension, Black Oxide, Locking No, Output Drive Male, Square, 1/2 in, Output Drive Shape Square, Output Drive Size 1/2 in, Output Drive Gender Male, Impact, Input Drive Female, Square , 1/2 in, Input Drive Shape Square, Input Drive Size... ... more

KESON OTR-18-50 50 ft Tape Measures, 1/2 in Blade

Long Tape Measure, Features Double Throat Rollers, Hook End, Case Material ABS Plastic, System of Measurement SAE, Graduation Marks 1/8 in, Tip Style Nonmagnetic Single Hook, Zero Point Location Hook End, Blade Length - Metric Not Applicable, Blade... ... more

KESON OTR-18M-50 50 ft/15m Tape Measures, 1/2 in Blade

Long Tape Measure, Features Double-Sided, Case Material ABS Plastic, System of Measurement Metric/SAE, Graduation Marks 1/8 in, 2 mm, Tip Style Nonmagnetic Double Hook, Zero Point Location Hook End, Blade Length - Metric 15 m, Blade Length - SAE 50 ft,... ... more

KESON MC-10-50 50 ft Engineer's Tape Measure, 1/2 in Blade

This KESON MC-10-50 50 ft Engineer's Tape Measure is the perfect solution for measuring distances of up to 50 ft. It is ideal for engineers, architects and builders. The white fiberglass blade measures 1/2 in. in width and has graduations every 1/10... ... more

RIDGID C-44 Drain Cleaning Cable, 1/2 In. x 50 ft.

Drain Cleaning Cable, Product Type IC Cable, Compatible Machine Type Drum Machines, Compatible Cleaner Series K-3800, Cable Type Drum, Maximum Drain Line Inside Diameter 4 in, Minimum Drain Line Inside Diameter 2 in, Cable Diameter 1/2 in, Cable Length... ... more

WESTWARD 2FDD1 Locking C-Clamp,11",3-3/8Cap,2-1/4Throat

Locking C-Clamp, 11 In, Capacity 3 3/8 In, Throat Depth 2 1/4 In, Clamping Force 900 Lb, Locking Mechanism Release Lever, Screw Mechanism Adjusts Clamping Pressure, Pliers Length 10 13/16 In, Nickel Plated, Hardened Carbon Steel, ASME B107.36-2002 ... more

WESTWARD 10D559 12 in Bar Clamp, Steel Handle and 5 1/2 in Throat Depth

Bar Clamp, Handle Style Sliding T, Clamping Capacity 12 in, Clamping Force 1,300 lb, Throat Depth 5 1/2 in, Jaw Pad Type Swivel, Sliding Mechanism Bar Slide, Bar Thickness 1/2 in, Application Woodworking, Bar Material Steel, Bar Width 1 in, Handle... ... more

BESSEY EZ15-6 6 in Clamp, Composite Plastic Handle and 2 3/8 in Throat Depth

This Bessey EZ15-6 6 in. Clamp is the perfect tool for clamping woodworking, assembly, gluing and construction projects. It can also be used for general purpose clamping tasks. This one-handed clamp has a composite plastic handle and a 2 3/8" throat... ... more

PRIMELINE TOOLS GD 12254 Cable Clamp,Steel,1/2" Clamping dia.,PR1

These cable clamps are constructed from galvanized aluminum. They include steel nuts and bolts and are used to clamp cable loops into fixed positions. These cable clamps measure 1/2 inch and a normal loop assembly would use three clamps. •Used to make... ... more

DE-STA-CO 205-U Toggle Clamp,Horiz,0.67 In,2.66 In

Toggle Clamp, Base Mounting Style Flange, Handle Orientation Horizontal, Holding Capacity - Maximum 60 lbf, Arm Style U-Bar, Tip Material Neoprene, Clamp Arm Opening Angle 90 Degrees , Arm Length 0.74 in, Height Under Arm 0.32 in, Includes Locking... ... more

WILTON 8-FC C-Clamp,8-1/2",Steel,Extra HD,31,250 lb.

The WILTON 8-FC C-Clamp is a heavy duty clamp you can use to secure a variety of objects. With an 8 1/2" max opening, this extra heavy duty c-clamp is ideal for industrial and automotive applications. It has a throat depth of 3 5/8 in., which means it... ... more

WESTWARD 2FDD2 Locking C-Clamp,11",3-3/8Cap,2-1/4Throat

Locking C-Clamp W/Swivel Pad, 11 In, Capacity 3 3/8 In, Throat Depth 2 1/4 In, Clamping Force 900 Lb, Locking Mechanism Release Lever, Screw Mechanism Adjusts Clamping Pressure, Pliers Length 11 3/8 In, Nickel Plated, Hardened Carbon Steel, ASME... ... more

WESTWARD 2FDC7 Locking C-Clamp,7",2" Cap.,1-1/8" Throat

Locking C-Clamp,6",2" Cap.,1-1/8" Throat ... more