You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... ... more
PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... | go to store |
 | PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more
PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... | go to store |
| Best Seller  | PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... ... more
PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... | $12.29 $11.25 go to store |
 | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | Sliding Door Roller Assembly, Sliding Patio Door Wheels with Ball Bearings - White Nickel Specifications: Color: White Nickel Material: Stainless Steel Slot Width: 5.5mm / 0.21'' Wheel Diameter: 7.3mm / 0.28'' Size: 60mm x 6.5mm x 23mm / 2.36'' x 0.25'' x 0.9'' (L*W*H) Package Content: 2pcs x Sliding Patio Door Wheels Description: [Material… ... more | FREE shipping go to store |
 | Sliding Door Roller Assembly, Sliding Patio Door Wheels with Ball Bearings - White Nickel Specifications: Color: White Nickel Material: Stainless Steel Slot Width: 5.5mm / 0.21'' Wheel Diameter: 7.3mm / 0.28'' Size: 60mm x 6.5mm x 23mm / 2.36'' x 0.25'' x 0.9'' (L*W*H) Package Content: 2pcs x Sliding Patio Door Wheels Description: [Material… ... more | FREE shipping go to store |
 | This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
 | This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This mirror door roller is constructed from nylon. It comes attached to an adjustable steel housing. This type of roller fits on Contractors mirror door. | Prime-Line Mirror Door Roller Assembly, 1-7/16 in. Roller, Steel Housing & Ball Bearings,... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This Mirror Door Roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design. This style roller is used on manufacturers mirror door and similar style doors. Size: 0.6" H x 1.13" W x 1.7" D |... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
 | This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This Mirror Door Roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design. This style roller is used on manufacturers mirror door and similar style doors. Size: 0.6" H x 1.13" W x 1.7" D |... ... more | go to store |
 | This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
 | This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This patio door roller is constructed from steel and has a diameter of 1-1/4 in. It comes affixed to an adjustable aluminum housing assembly. This roller is used on Miller Industries and similar styled patio doors. | Prime-Line Sliding Door Roller... ... more | go to store |
 | This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... ... more | go to store |
 | This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
 | This Mirror Door Roller is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. This Mirror Door Roller is most commonly used on wood framed sliding mirror doors. The wheel is constructed of durable plastic which provides for a... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... ... more | go to store |
 | Easily operate your screen door with the Prime-Line sliding screen door corner assembly. An all-in-one corner and roller combination, the corner fits into the frame to hold the bottom or top rails and the side stiles together. This assembly is used on... ... more | go to store |
 | This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare, and 1-5/8 in. height. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers. The stamped steel housing is adjustable and used by Milgard as well as a variety of other manufacturers. Primarily used on vinyl patio doors. The housing... ... more | go to store |
 | This sliding patio door roller assembly is constructed from stainless steel. It features a 1-1/2 In. ball bearing roller. This type of patio door roller has an adjustable stainless steel housing assembly. | Prime-Line Sliding Door Roller Assembly,... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This aluminum housing with... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Steel Ball Bearing Door Roller Assembly, for Viking Single Pack in Yellow | 5.4 H x 3.75 W x 0.95 D in | Wayfair D 1729
