irwin iwaf21tx252 power bit 1

Irwin 49907 Power Drill Auger Bit 7/16

#I-100 7/16 Solid Center Auger Bit 4-1/2 Twist Length 7-1/2 Overall Length Provides Extra Rigidity While Boring Wide Lands Keep The Bit Straight As It Bores Through The Hole The Flutes Are Ground Behind The Lands To Funnel The Chips To The Inside Of... more

Irwin Unibit 1/8 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin 10231 Unibit Step Drill Bit ~ #1

UNIBIT #1 STEP DRILLDrills 13 hole sizes1/8 to 1/2 dia. in 1/32 increments1/4 shank1/8 step thicknessSelf-starting tip more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2 Each

Irwin 10231 Unibit #1 13-Step 1/4-Inch Step Drill Bit 1/32-inch Steps (1/8- to 1/2- inches) Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size.... more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

Irwin 5/8 to 1-3/4 in. X 5-1/2 in. L High Speed Steel Adjustable Wood Boring Bit 1 pc

IRWIN Drill Press Adjustable Wood Bits features adjustable cutting blade bores a variety of hole sizes more

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin WeldTec 1-1/2 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

Irwin revolutionizes cutting and drilling tools with the patent-pending Weldtec cutting edge. The new Irwin Speedbor with Weldtec ship auger bits are made stronger and last longer because a harder cutting edge is welded to the base material. The result... more

IRWIN 3043016 Ship Auger Bit,11/2 Dia,7/16 Hex Shank

Ship Auger, Auger Drill Bit, 1 1/2 in, 17 in Overall Length, Hex, PTFE, Shank Hex Size 7/16 in more

IRWIN 88824 - 1-1/2 Speedbor 1/4 Hex Shank Spade Bit

IRWIN 88824 - 1-1/2 Speedbor 1/4 Hex Shank Spade Bit more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin WeldTec 1-1/4 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

Irwin revolutionizes cutting and drilling tools with the patent-pending Weldtec cutting edge. The new Irwin Speedbor with Weldtec ship auger bits are made stronger and last longer because a harder cutting edge is welded to the base material. The result... more

Irwin 49916 1-Inch by 7-1/2-Inch Solid Center Auger Bit

Power Drill I-100 Auger Bits 1 in x 7 1/2 in Irwin Power Drill I-100 Auger Bits WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer... more

Irwin 49916 1-Inch by 7-1/2-Inch Solid Center Auger Bit

#I-100 1 Solid Center Auger Bit 4-1/2 Twist Length 7-1/2 Overall Length Provides Extra Rigidity While Boring Wide Lands Keep The Bit Straight As It Bores Through The Hole The Flutes Are Ground Behind The Lands To Funnel The Chips To The Inside Of The... more

IRWIN 49916 Auger Bits, 1in Bit Size, Length 7.5in

Spur Auger, Auger Bits, 1 in, 7 1/2 in Overall Length, Hex, Bright (Uncoated), Shank Diameter 1 in, Shank Hex Size 5/16 in, Maximum Drilling Depth 4 1/2 in more

Irwin 3041019 Speedbor Max Wood Boring Drill Bit 1-1/8 x6

MAX Speed Bits 1 1/8 in Irwin Speedbor MAX Speed Bits WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other... more

IRWIN 3041019 Wood Boring Bit,1 1/8 In,Shank Hex 1/4

Speedbor, Hybrid Drill Bit, 1 1/8 in, 2 7/8 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Irwin 1/4 in. X 6 in. L Chrome Vanadium Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Irwin 1/2 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit Straight Shank 1 pc.

Masonry for use in hammer drills and standard rotary drills. Carbide tipped for maximum wear resistance and capacity to withstand high impact. Slotted tip for faster chip removal. Black oxide coating for extra durability and corrosion resistance.... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

2Pc Irwin Speedbor 6 in. Steel Wood Boring Bit Extension 1/4 in. Quick-Change Hex Shank 1 pc

IRWIN 6 Extension Bit allows you an extension of 6 inches to allow your drilling or driving application to be done in tight and hard to reach spaces. Durable and portable this extension bit can be carried along in your tools box with ease. more

Irwin Tools 3046008 Speedbor Max Self Feed Wood Drill Bit 1-1/2 Each

Ideal for pipe & conduit systems. 3 times the cutting area & edges of standard self feed bits. For drilling large diameter holes in wood aggressive screw pitch. Precision milled shank eliminates run out & wobble. Forged in 1 piece from high carbon... more

Irwin Speedbor 1-1/2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Tools 87924 Short Spade Bit 1-1/2 4

This IRWIN SPEEDBOR Short-Length Spade Drill Bit fits into confined spaces where standard lengths will not fit. The double-cutting spurs scribe the outside of the hole to help reduce breakout and the large shank design helps keep the bit durable. With... more

Irwin 42924 1-1/2-Inch by 3/8-Inch Shank Forstner Bit

1-1/2 Wood Boring Forstner Bit Brad Point Starts The Bit Cleanly Even On Uneven Surfaces Bores Precision Holes At Any Angle Reduced Shank .375 Round Shank Fits 3/8 & Larger Drill 3-1/2 Overall Length. Forstner Bit measures 3-1/2 inches in overall... more

Irwin Speedhammer Plus 3/4 in. Dia. x 8 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

IRWIN 49612 - 1/8 Brad Point 1/8 Reduced Shank Fractional Drill Bit

IRWIN 49612 - 1/8 Brad Point 1/8 Reduced Shank Fractional Drill Bit more

Irwin Tools 49612 Brad Point Drill Bit 1/8

IRWIN Tools Brad Point Drill Bit 1/8-Inch 49612 Brad Point Drill Bits Brad point tip provides accurate positioning for starting the hole Bit is precision ground for use in furniture making doweling cabinetry and other woodworking applications where an... more

Irwin Industrial Tool Co 1-1/2 Dual Auger Wood Bit

1-1/2 Dual Auger Wood Bit.Width 4 inches; Length 12 inches; Height 2 inches; Weight 1 Lbs more

Irwin 1/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 7/32 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Irwin Speedhammer Plus 3/4 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin Speedhammer Plus 3/8 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more